Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Want to mimic handwriting through stroke, not fill

edited September 2017 in AxiDraw
Hi there, I'm trying to plot writing.When it plots, I get an outline of the writing.  All of the solutions I've seen revolve around filling in the outline.  However, I don't want to address this by using a fill.  Instead, I simply want the writing plotted as a single stroke, just like handwriting.  How to modify my image to do so?  Thanks,

Here's what it looks like in AxiWrite:
image


Here's what's plotted:
image

Comments

  • edited April 2017
    Please read through sections 10.1 through 10.6 of the AxiDraw user guide, which discusses what the AxiDraw does (it draws the lines that you ask it to), how to preview how your artwork will plot, and discuss the various types of inputs that you might provide to it.


    From what I can see, you are providing the AxiDraw with an outlined shape, and asking it to plot that outline.


    What I think that you are asking about is how to convert from a scanned shape into a centerline that a pen can follow. As section 10.6 of the user guide discusses, that problem is called handwriting trajectory reconstruction; there is no "simply" about it. If you want the AxiDraw to plot the center line of text, you will need to (one way or another) actually provide that center line of the text to the machine.


    For short elements of text, like signatures, the word "sincerely" and so forth the best way to capture handwriting is to capture it in real time, as discussed in section 10.5 of the user guide.

Sign In or Register to comment.