Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

iOS 10.10 Yosemite

mattfishermattfisher
edited February 2015 in General
Good morning!  

After about an hour of trying to figure out why I couldn't get the Watercolorbot to connect to my Macbook, I realized that the software does not support iOS 10.10.  Any future plans to issue an version for Yosemite?

Thanks.

Matt Fisher
Greensboro, NC 

Comments

  • mattfishermattfisher
    OK, I tried this with another Mac computer, running iOS10.8.5 and still cannot get the computer to recognize the WaterColorBot.  Frustrated this morning.  

    I've installed RoboPaint RT with no luck getting it to recognize the robot on this computer as well.  

    Two lights are currently lit on the EBB:  The right USB light is flashing (two times and then a solid light) and the 3.3 V light is also lit steadily.  

    Any help is appreciated.  

    Matt


  • mattfishermattfisher
    OK, I got it to work.  Apparently using the wrong software.  D'oh!

    So got it painting, but now trying to figure out how to make it return to the correct home location.  When painting, everything is slightly off....  (misses paint tray and water trays...  not reproducing names when painted in Robopaint RT)

    I'll keep plugging away.

    m

  • Windell OskayWindell Oskay
    edited February 2015
    Sorry to hear about the trouble, and glad that you've got it up and (mostly) working.

    Can you say what the "wrong" software was?


    Since the WCB is losing position control, you should definitely stop and work without a brush until you've got that resolved. We have a long guide to troubleshooting WCB issues, up here: http://wiki.evilmadscientist.com/WaterColorBot_Troubleshooting

    You may have, for example, extra slack in the cord that is getting caught somewhere, or (if a WCB v 1.0) need to adjust the motor current.  If you can which version you have, and what things you've checked (on the troubleshooting list), we can help further point you in the right direction.

  • mattfishermattfisher
    Hi WIndell,

    Thanks for the response back. 

    Yes, I actually had to take apart the machine and rebuild it.  It seems like the cord was getting caught on itself.  But we rebuilt it and now it works just fine.  Thanks!

    I'm working on our EggBot tonight.  It's printing mostly well, just working out some of the bugs (most probably user error and I have to figure out the ups and downs of Inkscape).  

    Thanks!

    Matt

  • mattfishermattfisher
    Oh, and the wrong software was the version that was the "not the most recent version".  For some reason, I missed seeing the correct version on the download screen.  D'oh!  


Sign In or Register to comment.