Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Arduino 1.6.5 + Alpha Clock Five Firmware v2.1.0

edited January 2016 in Clock Kits
Has anyone out there been brave enough to go this route when updating / programming their clock?

Comments

  • I tried it, everything seemed to compile after adding a couple of "const"s to some of the library definitions, but I couldn't get it to upload.

    There's a new Sanguino board definition here: http://lauszus.github.io/Sanguino/ that I installed and was able to select it in the IDE, and I modified the boards.txt file to have right right upload rate, but it's still giving me the "stk500_getsync() not in sync: resp=0x00" errors.
  • Which type of programmer are you using, and which firmware are you using? (That is, if using Arduino-style bootloader firmware, is it one based on the v1 or v2 firmware?)
Sign In or Register to comment.