Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

EBB after reprogramming

edited October 2012 in Egg-Bot
This discussion was created from comments split from: Egg-bot firmware Problem.

Comments

  • I built it eggbot 2.1 .
    firmvare
    pours pickit2
    only the 3.3v led lights the others not
    mplab programming okay
    Windows xp does not recognise
    it
    usb driver installed
    eggbot connects pc
    only the 3.3v
    led lights and nothing happens
    error to search where
    thank you

  • Was the EBB working correctly before you reprogrammed it?  
  • I soldered I was building hardware 2.1
    firmware mplab pickit2
    okay
    Windows new hardware does not hit
    home
    only the 3.3v led on
    somebody else
    does not happen
  • So, it is likely to be a hardware issue, not a software issue?
  •  hardware problem
    I built it out of components now öszze but I cannot resuscitate it
    pic processor the usb  the pc does not communicate
    pc not hardware
    usb led not light
  • Did the programming appear to work correctly?  If so, it may indicate that the processor is working.
  • programming mplab pickit2
    okay
    mplab cheque okay
  • programming mplab pickit2 
    okay
    mplab cheque okay
    pic processor the usb  the pc does not communicate
  • only 3.3v led on
  • pic pin osc ok pic running
    pic processor the usb  the pc does not communicate
  • pic osc pin clock  oscilloscop check okay

  • pic usb pin low level
  • At this point, it still seems like it needs to be a hardware issue.  We've used the standard firmware to program many of these boards, and never had any problems with it.
  • I was building other ebb2.1 board
    pic go shopping microchip
    http://www.schmalzhaus.com/EBB/  

    EBB Version 2.1

    this does the same 
    firmvare 
    pours pickit2
    only the 3.3v led lights the others not
    mplab programming okay
    Windows xp does not recognise 

    new microcontroller not bootloader
    what kind of bootloader is needed into
    him
    where can be found?









  • I found the mistake
    there was not bootloader in a new processor
    from here I downloaded it

    thanks
Sign In or Register to comment.