Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 654 All Categories
- 218 General
- 70 Ask an Evil Mad Scientist
- 6 Blog Projects
- 13 Electronics
- 16 Microcontrollers
- 10 Software Tools
- 0 Fabrication Technologies
- 436 Product Support
- 76 AxiDraw
- 26 WaterColorBot
- 172 Egg-Bot
- 2 AYAB
- 57 Clock Kits
- 23 Larson Scanner and Menorah
- 40 LED Matrix Kits
- 38 Other kit and product support
eggbot issues
I just finished assembling my eggbot.
When I plug in the usb connection nothing happens.
I've tested with Win7, Ubuntu 10.04, and opensuse 12.1.
In windows when I plug it in nothing happens. The add new hardware dialog does not show up.
In Linux there are no usb event in the /var/log/messages when I plug it in.
When power is applied the 3.3v green led illuminates and the motor moves a bit.
I've tried a different usb cable with no change.
Not sure of anything else to check.
When I plug in the usb connection nothing happens.
I've tested with Win7, Ubuntu 10.04, and opensuse 12.1.
In windows when I plug it in nothing happens. The add new hardware dialog does not show up.
In Linux there are no usb event in the /var/log/messages when I plug it in.
When power is applied the 3.3v green led illuminates and the motor moves a bit.
I've tried a different usb cable with no change.
Not sure of anything else to check.
Comments
Plugged it in. Everything worked correctly.
Thanks for the excellent support.