Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Larson Scanner extended

Is the new code posted somewhere else.

I tried compiling it using Arduino IDE 1.0.3 and I get this error.
"a function-definition is not allowed here before '{' token"
@ line
void delay_ms(uint8_t ms) {

I've rebuilt the board and I used the make file and forced the build anyways.
But when I load the hex it works in regular mode, but when you hold the button and power it up.
It does its config light show, then the LED's scroll off to one side and never come back.

Comments

Sign In or Register to comment.