Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 654 All Categories
- 218 General
- 70 Ask an Evil Mad Scientist
- 6 Blog Projects
- 13 Electronics
- 16 Microcontrollers
- 10 Software Tools
- 0 Fabrication Technologies
- 436 Product Support
- 76 AxiDraw
- 26 WaterColorBot
- 172 Egg-Bot
- 2 AYAB
- 57 Clock Kits
- 23 Larson Scanner and Menorah
- 40 LED Matrix Kits
- 38 Other kit and product support
E-textile Interactive Board Conversion.
Has any one converted the interactive boards into an e-textile application. I would love to have some direction doing this if it is possible. One of the areas where I anticipate problems is figuring out how to connect the groups of LEDs. I also will work with surface mounted LEDs (fabricated for e-textile applications) will that pose a current issue? Can the Microcontroller be purchased separately? If there any other areas where I will run into problems I would love to hear about them.
