Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 654 All Categories
- 218 General
- 70 Ask an Evil Mad Scientist
- 6 Blog Projects
- 13 Electronics
- 16 Microcontrollers
- 10 Software Tools
- 0 Fabrication Technologies
- 436 Product Support
- 76 AxiDraw
- 26 WaterColorBot
- 172 Egg-Bot
- 2 AYAB
- 57 Clock Kits
- 23 Larson Scanner and Menorah
- 40 LED Matrix Kits
- 38 Other kit and product support
Problem with eggbot
Hello everyone!
I am experiencing some difficulties with eggbot.. :S It seems like the board can't give orders to both motors. Both motors work, I tested that by plugging the egg-rotating mottor to the pen-rotating motor slot on the board. It seems that the board can only move any motor connected to the egg rotating slot, but not on the pen rotating one.
Is something wrong with the board or am I not calibrating something correctly?
I have checked the current with the poteniometer as the instructions say. The motors work very nice with a little current.
I am experiencing some difficulties with eggbot.. :S It seems like the board can't give orders to both motors. Both motors work, I tested that by plugging the egg-rotating mottor to the pen-rotating motor slot on the board. It seems that the board can only move any motor connected to the egg rotating slot, but not on the pen rotating one.
Is something wrong with the board or am I not calibrating something correctly?
I have checked the current with the poteniometer as the instructions say. The motors work very nice with a little current.
Comments