Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 654 All Categories
- 218 General
- 70 Ask an Evil Mad Scientist
- 6 Blog Projects
- 13 Electronics
- 16 Microcontrollers
- 10 Software Tools
- 0 Fabrication Technologies
- 436 Product Support
- 76 AxiDraw
- 26 WaterColorBot
- 172 Egg-Bot
- 2 AYAB
- 57 Clock Kits
- 23 Larson Scanner and Menorah
- 40 LED Matrix Kits
- 38 Other kit and product support
Power Supply Seems to not work?
Just built my fabulous eggbot, but upon trying to calibrate the pen arm the servo would not move or respond at all. Through some digging on this forum, I saw that one possible problem could be the power supply, and to try unplugging the USB to see if the EBB still lights up. And alas, it does not! Can anyone offer advice? Surely I cannot have confused something as simple as plugging in the power supply.
Comments
Do the other two motors respond properly?
Forgive me, I am an idiot, the power strip that I was using had master controlled outlets and I didn't realize. All is fine and working great!
Great-- glad to hear that it was something simple.