Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 654 All Categories
- 218 General
- 70 Ask an Evil Mad Scientist
- 6 Blog Projects
- 13 Electronics
- 16 Microcontrollers
- 10 Software Tools
- 0 Fabrication Technologies
- 436 Product Support
- 76 AxiDraw
- 26 WaterColorBot
- 172 Egg-Bot
- 2 AYAB
- 57 Clock Kits
- 23 Larson Scanner and Menorah
- 40 LED Matrix Kits
- 38 Other kit and product support
Pen up and down motor not functioning
Hello,
The function of "up and down" on my Axi draw V2 is not working, although the y and x axis seem to be fine.
I have checked the connections of the wires, as well as my power source.
I'm wondering is there any other troubleshooting that would be useful before I look into getting into replacing parts?
Thanks!
Comments
If XY movement is working well but Z is not, and the cabling is good, then it is most likely the case that the servo motor itself has failed. Please contact our store directly ( http://shop.evilmadscientist.com/contact ) about a replacement and we'll have some follow-up questions.