Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
- 654 All Categories
- 218 General
- 70 Ask an Evil Mad Scientist
- 6 Blog Projects
- 13 Electronics
- 16 Microcontrollers
- 10 Software Tools
- 0 Fabrication Technologies
- 436 Product Support
- 76 AxiDraw
- 26 WaterColorBot
- 172 Egg-Bot
- 2 AYAB
- 57 Clock Kits
- 23 Larson Scanner and Menorah
- 40 LED Matrix Kits
- 38 Other kit and product support
Making a base for Axidraw V3/A3
I guess this is aimed at Windell.
Can you give me some measurements/sizes so that I can make a base/case for my V3/A3? I plan to remove the feet and attach it directly to a board.
• Screw size
• Distance between holes widthways
• Distance between holes lengthways
James
Comments
Please contact technical support for mounting drawings. (I would also note that we generally recommend keeping the outrigger feet for added stability, and putting screws through the provided holes in those feet. The feet are there, in part, to make it easier to mount to a surface.)