It looks like you're new here. If you want to get involved, click one of these buttons!
Com ports available on your system; ('COM1', 'COM4', 'COM10')testing: COM1 for EBB Board testing: COM4 for EBB Board Found EBB on port: COM4EBBv13_and_above EB Firmware Version 2.2.3Current setting: 569.23mA. Motor supply voltage: 11.87V.
For the multi-bot setup to work on Mac / Linux this will have to be incorporated in the eggbot extension.
From other threads on this forum I see that the inkscape eggbot extensions are "stripped to the bone" to aid code reliability so this might/might not make it to the "official" code.
bDryRun = True # write the commands to a text file instead of the serial port