Making the world a better place, one Evil Mad Scientist at a time.
Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Hi Windell,
I made the modification factors 10000 and 10 to setup higher speeds.
Through step_scaling_factor = 0.5 now I can use the standard svg-files without modifiyng the documentsize to 6400x1600. And this did even cover speed-adjusting.
Thank …
Hm that's seems to be pretty hard to do.Why would you like to take out the egg and then put it into the eggbot again? Why not do all the marking at once?
my spontaneous ideas:
two sticks in V-shape above and below the egg to center the egg while rot…
Hi Windell,
thank you very much for your answer.I will test this tomorrow.
How about a pen-adapter for exact repositioning made by a 3D-printer?
best regards
Stefan
Hi Ragnar,
I guess my motors can move pretty fast because of the specscurrent up to 1.7A holding torque 0,89 Nm.
I bought them from herehttp://www.pollin.de/shop/dt/NTQ1OTg2OTk-/Motoren/Schrittmotoren/Schrittmotor_PSM57BYGHM201_0_9_.html
For pen Up/…
EDIT2:through some more try and error I found this codelinestrOutput = ','.join( ['SM', str( td / 4), str( yd2 ), str( xd2 )] ) + '\r' #this line determines the plotting-speed
The first parameter of the SM-command is "duration" which means the tim…
OK so I have done some more tests.
As long as I run the motors over the manual function I can increase speed up to 10000 steps per second.the Inkscape-plugin limits the speed to this value. So as the number of steps is limited to 3200 steps through …
Hi Brian,
thank you very much for your testings and info. Next thin I will do is checking the firmwareversion.I noticed another effect/bug.With a 400 steps per rev. Motor the canvas is 6400x1600 steps. If I use the hole area of 6400 stepssome parts …