Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

rbtroj

About

Username
rbtroj
Joined
Visits
4
Last Active
Roles
Member

Comments

  • Thanks, Windell. The chips are all seated well so I will see if I can re-do the joints on the sockets.
  • Interesting ... received my replacement chips and added them to the board one by one as I tested. No difference - however, I pushed down on the LED driver #2 (inner one of the two on the left side of board) and the blue LEDs on the right side of the…
  • I had it on the external plug that was optional with the kit. I will try uploading different sketches once I get it going again.  Thanks for your help!
  • Good questions. 2. The board is P2 config 1. I have not done any programming as I had thought the default was to light all the LEDs as a test (is that wrong?) If you think I should upload a new sketch I will ... Just as soon as I receive my replac…