Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
craiglindley
About
- Username
- craiglindley
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
Thanks Windell. The problem was not the cable it was using arduino as the programmer. As soon as I changed it to avrisp everything worked. Excellent!
-
OK. I bought and built the ispShield and the 2313 target board. On the target board I installed a 6 pin ISP header with the leads facing upward and a 20 pin ZIF socket. I put positioned the jumpers to disable autoreset and to provide target power. …
-
Thanks
-
I wish I had known this before I purchased the programmer as the AtTiny4313 is what I bought the programmer for. So can someone tell me exactly how to connect up this programmer to the AtTiny4313 externally on a breadboard for example.
-
OK so I'm completely clear. I cannot use the Zif socket on the ISP Shield to program an AtTiny4313?
