Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
WakeUpWolfgang
About
- Username
- WakeUpWolfgang
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
Sure I know 2 solder pads lifted up but the connections where not broken
-
The other one I used has the bootloader that comes with the Arduino Uno
-
Cant be programmed and the LEDs are doing the same thing.
-
I just pulled the Atmega328p-pu with another Atmega328p-pu That I have that I knows works and tried uploading peggy2_minimal and I get the same result.
-
I pulled U2 and U3 I get the same thing when trying to upload the peggy2_minimal sketch. Maybe I never could upload a sketch and just did not look at the output.
-
I was messing with the ardunio SDK and when I try uploading something to the board I get. "avrdude: stk500_getsync(): not in sync: resp=0x00"
-
Yes there was I thought I was missing some jumpers. I cut SER so I have P2 with the jumpers. I have the same results.
-
Here is a video I just made of it. http://www.youtube.com/watch?v=124ZP7HxmN4
-
Nothing is lighting up but columns 7 and 23 and nothing is lighting up in the top 2 most rows. What is lighting up is flashing and each led seems to be at different brightness's. It is the same no matter what sketch I use.
