Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

tsnuggs

About

Username
tsnuggs
Joined
Visits
0
Last Active
Roles
Member

Comments

  • Nice graph and great info. When I created the simple calibration plot, I expected some of my circles to actually plot as circles instead of all ovals. After looking at your graph, I realize I need to adjust my pen arm motor. I'll play around with th…
    in Calibration plot Comment by tsnuggs April 2014
  • Thanks for telling me about thingiverse.com.   I uploaded my file and egg photo to: http://www.thingiverse.com/thing:300570. 
    in Calibration plot Comment by tsnuggs April 2014
  • I found my problem. In short, I increased my Computer Sleep and Display Sleep time in the Energy Saver of the System Preferences to 2 hours. They were set to 15 mins and my plots were taking much longer. I happen to notice that the plot stopped when…
    in Solved - Stipple file will not completely print Comment by tsnuggs April 2014
  • Well, the problem is not fixed. It's just inconsistent plotting on my MAC. Sometimes it will stop while plotting my stipple file. I can then go manually control the plotter through inkscape and it works fine. I start it again and it may or may not c…
    in Solved - Stipple file will not completely print Comment by tsnuggs April 2014
  • Thanks for the quick reply. I originally thought that this was a software issue of some sort due to the 'IndexError'. However, I found that this occurs anytime plotting is in progress and I unplug the USB cable. I do this since the cancel button doe…
    in Solved - Stipple file will not completely print Comment by tsnuggs March 2014
  • Picked up at new servo from Evil Mad Scientist. It's working now.
    in Pen Servo is not working Comment by tsnuggs March 2014