Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Carl

About

Username
Carl
Joined
Visits
0
Last Active
Roles
Member

Comments

  • Alright, after perusing the Bulbdial code again, I see where the clocks serial port is setup at 19200 baud and the time header needs to be a byte equivalent to 255 (FF). the current sample Process Sketch has the baud set at 9600 and is sending a ti…
    in Bulbdial pc synchronization problem Comment by Carl December 2014
  • Thanks for the reply, I can confirm that the com port im using is correct, I see the tx/rx led's illuminating when I try to send data. the Process sketch seems to be using a baud rate of 9600, I've tried changing that to 14400 and 115200 with no lu…
    in Bulbdial pc synchronization problem Comment by Carl December 2014