Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
smilenjohn
About
- Username
- smilenjohn
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
I swapped the chips from the 3rd board and the 5th (from left to right) and now it seems to work. I have no idea why? If I swap them back I get the same problem. I guess I will just leave them in the way they work, and not worry about WHY? (If I ca…
-
Ok..... I cut all of the scanners apart, and looped the in's and out's. They each work fine by themselves. So I've rewired them all together, and now when I start them, the "pulse" starts a the 1st board from the left, and the 3rd board simultaneous…
-
I followed the articles directions step by step, and it is certainly possible that I've made a mistake, but I've checked and re-check and I don't see any wiring mistakes.
-
i Purchased 5 preprogrammed ATtiny2313 for Larson scanner-extended chips. Is there an "Easy" way to determine which firmware is on each chip? I have a USBTnyISP AVR PRogrammer, I'm just not very proficient with it. I'm also not sure what board build…
-
