Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

karlkonnerth

About

Username
karlkonnerth
Joined
Visits
0
Last Active
Roles
Member

Comments

  • I am somewhat confused by your comments.  The circuit diagram shows pin 15 (not 16) connected to the 68 ohm resistor which connects to control line LED 10.  It shows pin 16 connected to the 24 ohm resistor which goes to control line LED 1.
    in BulbDial red ring problem Comment by karlkonnerth March 2015
  • I checked all of the connections on the LED10 line and they all looked good.  I then re-soldered them to be sure.  Still none of the red LEDs light. I don't have a scope handy at the moment.  If I get one, what should I expect the signal to look li…
    in BulbDial red ring problem Comment by karlkonnerth March 2015