Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
Arty Ste
About
- Username
- Arty Ste
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
Sorry yes it is the same as the user guide - been a long week :-). Yes I removed the pen clip last time but probably didn't tighten them enough. All good tips there Windell, will try if and when they loosen again. I see you have an optimisation t…
-
It didn't. How do I post a pic? Cheers
-
It's the screws behind the pen holder. Not the black screws on the actual holder, it's the silver screws that holds the holder in place. It's actually different looking than the user guide. Hope the pic below works. http://s1156.photobucket.com/use…
-
Worked great Windell, thanks so much. I think the small gap with horn and metal helped enormously. One more thing. Would you know why the two screws behind the pen holder keep coming loose? It's the two screws that, when tightening, the pen holder …
-
Will let you know how I get on following your advice when I get chance to try them out. Thank you very much :-).
-
Any pointers as to what to set it too? Cheers
-
The servo is working fine Lenore although I did initially have to tighten two screws near it as the mount was wobbling about. What I meant was, for example, if I was to draw a straight line left to right then at the end of the line on the right the…
-
Well I had mine delivered yesterday - thanks Lenore. Been optimising it as best I can. Overall I'm happy with it. One question. I use thick paint pens for artwork, how do I lift the pen at the end of a line to prevent it from 'pooling'? Be nice i…
