Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location,

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!



Last Active


  • I finally got a chance to try the new power supply and it appears to be working properly. Thanks for all your time! -Matt
  • Tried turning current up but still only get results like in the second video posted above. When doing nothing, the motors just slightly click. Still not getting warm. Thanks.
  • No, the motors have been powered for more than 20 minutes now and they are cold. Did the preflight again. The line on the Y motor seemed really tight so I gave it a little more slack. Both seem to be moving freely and smoothly now when turned. I did…
  • Thanks. - The servo motor doesn't appear to be getting hot.- The steppers don't work properly, even when the servo is unplugged from the EBB. After trying to run a job the X stepper seems to be move very slightly but only as long as the USB is plugg…