Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Craig

About

Username
Craig
Joined
Visits
17
Last Active
Roles
Member

Comments

  • Thanks Windell I will follow up with email... When starting from scratch (re-loading everything) I was able to draw an AxiDraw file as described. It wasn't until I loaded the EggBot control that I lost the ability to draw using AxiDraw. Merry Chr…
    in Engraver will not start help needed Comment by Craig December 2017
  • Sorry I should have elaborated - yes I did run an EggBot drawing with eggBot control engraver enabled on the AxiDraw and the engraver did not work, tried both engravers. Regarding the error...I am using an AxiDraw drawing using AxiDraw control on t…
    in Engraver will not start help needed Comment by Craig December 2017
  • Running EggBot with AxiDraw did not bring on the engraver so no change. I next tried starting from scratch by reloading InkScape, AxiDraw and EggBot testing as I went along. I think I may have identified another issue. Loading InkScape first with …
    in Engraver will not start help needed Comment by Craig December 2017
  • Hi Windell I have tried the pot with no luck…and no this is not the soldering kit…Options 'enable engraver' checked. A little more info, I originally purchased the wrong engraver Ostrich not pro. I have sense received the correct engraver. I thoug…
    in Engraver will not start help needed Comment by Craig December 2017