Maintenance notice:
These forum archives are read-only, and will be removed shortly.
Please visit our forums at their new location, https://www.evilmadscientist.com/forums/.
MRMonteith
About
- Username
- MRMonteith
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
I had tried it before with and without the Override selected. Also did the steps above and the same issue. I examined all the connections with a 16x loupe and a blown up macro image. All solder joints are great. I tried all the steps above and …
-
Here is a pic of the board so in case I missed something. http://i370.photobucket.com/albums/oo145/mrmonteith/DSCF0665_zps77b867fc.jpg
-
Still get the same thing. I put the .1uf between RST and GND. I can't get it to burn the bootloader.
-
Unable to burn bootloaderThe chip is a ATmega328P.I haven't messed with it since this note. i needed a break. So I'll try it again and see if I missed anything.
