Evil Mad Scientist Laboratories
Making the world a better place, one Evil Mad Scientist at a time.
Skip to primary content
Skip to secondary content
These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location,
It looks like you're new here. If you want to get involved, click one of these buttons!
Sign In with Evil Mad Scientist
Ask an Evil Mad Scientist
Larson Scanner and Menorah
LED Matrix Kits
Other kit and product support
edited February 2014
Can you pause the pen while printing in order to change color. Also is there a control that allows the software to stop to allow a color change and then start again with a new pen?
One way to do this: based upon color, separate your design into different layers. Then print the design layer by layer, changing pens between each layer you print.
Does the egg bot always return to the exact spot it began? Also. Can you pause the pen while printing? I have had occasion where I wanted to stop the printing for a few moments but there does not appear to be any way to stop the prinitng until it is completed.
You may find it helpful to delve into the details of the
. In particular, the
tabs of the Eggbot control extension cover those topics.