Maintenance notice: These forum archives are read-only, and will be removed shortly. Please visit our forums at their new location,

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!



Last Active


  • My first try was a freeze but i want to double check everything to be sure. (off to work now)Thank you for the sofetware revisions.On a seperate note: I am think of a new build using a Smoothie Board and the steppermotors I have on the Ostrich Egg B…
  • I downloaded the 2.6.4. Tried to Check the EBB version using the manual command.> Frozen. I tested the USB plug with an external hard drive and it does show up.
  • unplugged the board > tried to run the egg motor a few steps. Instead of "inkscape can't find the eggbot on any port" I get the crash instead.
  • Thanks for your help and quick response 1-I tried extentions> render> gear> gear >Aply button with Live preveiw box checked. I DO have the image of a gear/cog on the screen 2-unplugging effects no change. all buttons do not respond. I mu…
  • I dowloaded the newest eggbot extensions (2.6.3). Came back with an error window that was exactly like the one in this thread:Mac OSX 10.11.1 eggbot extension 2.6.3 problems with Inkscape 0.91 - Evil Mad Scientist Forums I followed the recommendatio…
  • Quartz 2.7.8 Mac OS 10.11.1  Inkscape 0.91 Eggbot extensions 2.5.0 EBB firmware unknown (Ostrich-egg model purchased in 2013, red colored board) Freezing or crashing, I am not sure the difference. When I go to Extentions/Eggbot/Eggbot control/ the…
  • Hi Windell, Thanks for your response.I have the engraver attachment too. I would like to try it. I have no experience in programming or reading code. Sorry for the stupid question but…  "Open up the Eggbot software ( within the Inkscape Ex…
  • This helped me thank you very much.